Steve Jobs' Near/Far WiFi Problem, Explained (Video)

Steve Jobs introduced the iPhone 4 yesterday. You may have heard about this snazzy little device and you may have also heard about the problems Mr. Jobs had in demonstrating it. Mr. Jobs blamed the problem on WiFi, and as best I can tell he was right. I whipped up a quick video to explain what likely happened.


It's my first video blog post, so be gentle. Thanks to Rough & Tumble Films in Los Angeles for providing the space and Nick Robinson (@nickrob on Twitter) for helping me out with the shoot.




Comments

  1. Mark DavisJune 10, 2010 at 2:23 AM

    hi Ben,

    I enjoyed your explanation of the Wi-Fi problem on Steve Jobs recent iPhone release. However, I think the problem was more likely due to excessive numbers of 802.11 management frames being transmitted. I doubt if there were 300 or so Wi-Fi hot spots (i.e. Mi-Fi devices) present in the auditorium, I suspect there were 300 STAs busily transmitting probe request frames to a few APs in order to gain network access. Typically, an un-associated STA will transmit a few probe requests frames a second and if you then multiply this by several hundred client STAs trying to do the same thing, then you have a very busy wireless medium and more importantly the collision probability will be high, probably so high as to render any form of reliable communication almost impossible. Furthermore, even if you did manage to become successfully associated with an AP, the capacity available will be so small that it will probably cause any http or tcp/ip session to time out.

    ReplyDelete
  2. Ben MillerJune 10, 2010 at 11:26 AM

    I have to disagree. The Apple Airport client in OS X, and the Windows clients for XP SP3, Vista and 7 all disable Probe Requests after a station is associated.

    It is possible that management frames could have been a problem due to excessive Beacons, but that would go back to the problem of having too many APs on one channel.

    ReplyDelete
  3. Quique EspañaJuly 22, 2010 at 2:59 AM

    Interesting approach as for the issue understanding, considering that most or all of the APs could've been in the same power output range; as for the solution, fewer APs or one AP per channel is an obvious solution but in Job's case, I think they could've been one step ahead and consider your visitors\attendees would bring their own APs, so, Job's people should've set up an AP with stronger signal, by simply attaching a stronger antenna (i.e. 5dbi) because, stronger antenna = stronger signal = better reception = steadier connections, but maybe they just didn't see it coming....

    ReplyDelete

Post a Comment

Popular posts from this blog

Five Facts About 6 GHz Wi-Fi

Image
Two pieces of important news hit the wire recently: the 6 GHz band was approved for Wi-Fi, and alcohol sales have skyrocketed .  Combine the two, and what do we get? A five-pack of Coors Light Cold Hard Facts about Wi-Fi in the 6 GHz frequency band. Editor's note: This is a relatively long post, but 6 GHz Wi-Fi is an undoubtably robust topic. If you have questions after reading this blog, comment below or contact Ben via email or Twitter using the information below, and Sniff Wi-Fi will address those answers in a future post. We may be knee-deep in a global pandemic, but that doesn't mean your humble blogger can't brew up a post on the topic of 6 GHz Wi-Fi. Wi-Fi professionals will soon have unlicensed frequency available in the 6 GHz band. Here, then, are five facts to know about Wi-Fi in the soon-to-be-available 6 GHz frequency band. Fact #1: The 6 GHz band adds 1,200 MHz of spectrum for Wi-Fi The Federal Communications Commission (FCC) is the federal
Read more

Chips, Glorious Wi-Fi 6E Chips!

Qualcomm, owners of the Atheros line of Wi-Fi radios, recently announced the availability of Wi-Fi 6E chips. Game onnnnnnn! 6 GHz Wi-Fi is here. Sort of... Qualcomm is selling Wi-Fi 6E (802.11ax w/ 6 GHz support) chips, but we don't yet know when enterprise-grade APs and mobile devices will begin supporting 6 GHz Wi-Fi. Chip-to-product timelines can vary. Wi-Fi 5 (802.11ac) saw enterprise WLAN vendors sell products only a few months after chip announcements. Wi-Fi 6 (802.11ax) saw the big vendors wait a year or more before introducing new AP models. A ton of concerns factor into a vendor's decision on when to develop, manufacture and market new AP technology. Vendors with small market share may be extra eager. Aerohive tried to boost their enterprise Wi-Fi profile by being a leader in Wi-Fi 6. On the other hand, some vendors' enthusiasm for new Wi-Fi hardware may be dulled by competing organizational initiatives. Aruba/HPE, for example, was veering f
Read more

Go To Sleep, Go To Sleep, Go To Sleep Little iPhone

Image
In some circles, Apple Wi-Fi devices are knows to have problems with lost connections.  iPhones and iPads will unexpectedly miss incoming calls, have delays in receiving push notifications and even be forced to reauthenticate. There is a solution to Apple devices' connection problems, and as with most "device problems", the fix resides on the infrastructure.  The DTIM setting needs to be increased.  ( Apple recommends a setting of 3 or higher .)  Here's why: Some Apple Wi-Fi connection problems stem from Apple iOS devices' use of 802.11 power management.  To understand what Apple devices are doing with power management, one must first understand how 802.11 power management works. Let's start with unicast data.  The 802.11 standard allows devices' Wi-Fi radios to enter the Doze state in order to conserve battery life.  Wi-Fi radios in the Doze state are unable to receive data from the AP, so APs buffer all unicast data that has a destination MAC addr
Read more