Posts

Five Facts About 6 GHz Wi-Fi

Image
Two pieces of important news hit the wire recently: the 6 GHz band was approved for Wi-Fi, and alcohol sales have skyrocketed .  Combine the two, and what do we get? A five-pack of Coors Light Cold Hard Facts about Wi-Fi in the 6 GHz frequency band. Editor's note: This is a relatively long post, but 6 GHz Wi-Fi is an undoubtably robust topic. If you have questions after reading this blog, comment below or contact Ben via email or Twitter using the information below, and Sniff Wi-Fi will address those answers in a future post. We may be knee-deep in a global pandemic, but that doesn't mean your humble blogger can't brew up a post on the topic of 6 GHz Wi-Fi. Wi-Fi professionals will soon have unlicensed frequency available in the 6 GHz band. Here, then, are five facts to know about Wi-Fi in the soon-to-be-available 6 GHz frequency band. Fact #1: The 6 GHz band adds 1,200 MHz of spectrum for Wi-Fi The Federal Communications Commission (FCC) is the federal ...

OFDMA Is the Only Part of Wi-Fi 6 That Matters (For Most Enterprises)

The new Wi-Fi 6 (802.11ax) standard offers several new technologies, but only one that really matters (for most enterprises): OFDMA. Have you heard about Wi-Fi 6?  (Or, at least, 802.11ax?)  If you work in or around networking or Wi-Fi, you probably have.  Your humble author has read about it in blogs, tweeted about it, streamed about it on Twitch and watched commercials about it on college football telecasts. It was the last thing -- the TV commercials -- that gave yours truly a double-take.  "Is Wi-Fi 6 that big?", I murmured to myself while taking in CDW's commercial for Cisco's Wi-Fi 6 gear.  Commercials on national sports broadcasts aren't cheap, so someone must be asking about it.  (Or at least think there's money in it.) The standard (technically an "amendment", not a full-blown IEEE standard) Wi-Fi 6 is based upon is 802.11ax, and according to the latest 802.11 Working Group timeline , 802.11ax won't be finished for several month...

Wasted Wi-Fi Q(-Tip)&(802.11)A: Transmit Power, Conducted Power and EIRP

Image
Last week's blog about Wasted Wi-Fi prompted some questions about AP transmit power in the enterprise.   Let's answer some of those questions by doing a little Q(-Tip)&(802.11)A, an exercise in which we watch a Q-Tip video before Answering a few questions about Wi-Fi. You've seen the Q(-Tip), now on to the A(nswer)s: Wasted Wi-Fi is all about APs and/or stations making inefficient use of a Wi-Fi channel.  When Wasted Wi-Fi happens, either data rates are lower than they should be, or Retry percentages are higher than they should be. The Q becomes, where do equivalent isotropically radiated power (EIRP), transmit power and conducted power fit in? The A is, higher data rates and lower Retry percentages tend to happen when signal-to-noise ratio (SNR) is higher, and higher EIRP/conducted power/transmit power leads to higher SNR. In other words, if you talk louder, then people hear louder.  When people hear louder, they have a better chance of being...

Are You(r APs' Transmit Power) Still Down? Raise 'Em Up

Image
Remember me? (lyrics NSFW) Too many enterprise Wi-Fi deployments experience Wasted Wi-Fi.   Wasted Wi-Fi is what happens when an enterprise wireless network offers users lower performance than it would under an optimal configuration. Today, the most common culprit of Wasted Wi-Fi is low AP transmit power.  So, if your AP transmit power config is Still Down, Raise 'Em Up. I've noticed a lot of Wasted Wi-Fi recently.  Situations where, given the distance, client density, and physical environment, the Wi-Fi should be faster.  These are situations where, irrespective of issues that may exist in the infrastructure equipment or design of the wireless LAN, client devices are getting worse performance than they should. By its definition, Wasted Wi-Fi lays entirely at the feet of those who configure enterprise Wi-Fi settings.  The good news is, that means Wasted Wi-Fi is solvable without expensive and time-consuming changes to the wireless LAN ...

How to Validate Hospitality Wi-Fi in Five Minutes Using Any Old Mac

Image
Do you own, manage, or provide technology services for a classy hotel?   Yes??   Then this blog's for you.   No, we are not going to reveal the secrets of luring wealthy clientele via watered-down booze and disreputable ladies.  Those things are obvious, and if they're not obvious you should ask a French person.  (One of my best friends is French, so I can say that...  I think.)   We are going to reveal how to quickly validate your other most important service -- Wi-Fi -- using free, built-in Mac software. The nice thing about providing Wi-Fi service at an upscale hotel (or other hospitality environment; convention centers, cruise ships, et al. count too) is that wealthy people hate to complain.  (Publicly, that is.  Privately that's all they do.)  The not-so-nice thing is that wealthy people are big fans of ghosting.  They will abandon your upscale hotel with the quickness if service of any kind dips ...

Roam, If You Want to (As Long as Your Channels Are 20 Mhz Wide)

Image
Editor's note: In the original publication of this article, the relationship between Wi-Fi channel width and SNR was described imprecisely.  While the point of the article was correct -- that wider channel widths increase the likelihood of Wi-Fi frame failures for mobile client devices -- the mistakes have been corrected.  Thank you to Adrian Granados . Ahh, roaming. Few things capture the spirit of freedom like the ability to Roam wherever you want to go. Wi-Fi has its own brand of roaming, and there is one aspect of Wi-Fi roaming that often gets overlooked: 40 MHz and 80 MHz wide channels can make Wi-Fi users feel like they've been bounced from the Love Shack. Much has been written and spoken about the pros and cons of the three Wi-Fi channel widths: 20 MHz, 40 MHz, and 80 MHz. 20 MHz wide channels allow for the highest number of APs to be deployed -- nice for ultra high-density Wi-Fi -- because each AP takes up less of Wi-Fi's scarce frequency space.  ...

The Unknown Unknowns of Wi-Fi

Image
"There are known knowns; things that we know we know. There are known unknowns; that is to say there are some things we do not know. But there are also unknown unknowns -- the ones we don't know we don't know. And if one looks throughout [history], it is the latter category that tends to be the [most problematic]." -Donald Rumsfeld, former United States Secretary of Defense For those of us who follow United States politics, the above quote is a famous one.  And for those of us who work in Wi-Fi, being aware of Unknown Unknowns can make the difference between good Wi-Fi and bad. What are the Known Knowns of Wi-Fi?  AP status (up or down).  AP channel.  Number of associated client devices.  Data statistics.  We can gather these pieces of information from WLAN controllers or wireless management systems. And what are Known Unknowns?  For one, we know that we don't know precisely which nearby APs and client devices are causing CCI.  We kn...