Back To Basics (Again)

The hot topic in WiFi nowadays is high density (HD), and for good reason.  It seems you can't swing a dead cat anymore without hitting some place (concert hall, convention center, tourist trap) where there's an attempt to offload cell phone data onto a WiFi network.  The most interesting thing about HD WiFi to yours truly is that it's the same fundamentals we've always known about, just recycled.

If you were one of the lucky (unlucky?) ones to work in WiFi during its more formative years, you may have been taught certain basic concepts about WiFi.  For the author, fond memories still remain of sitting an Enterprise WLAN Administration course way back in 2003 (taught by noted Massachusetts Yankees fan David Westcott) as part of my preparation for the certified wireless network administrator (CWNA) exam.

What did Mr. Westcott teach us lo these many years ago?

Plan out your space alternating between channels 1, 6 and 11 in the 2.4 GHz band.

If APs are spaced too close together, adjacent channel pairs (1 & 6 or 6 & 11) will interfere.

Keep the transmit power of your APs near 30 mW (which was the typical transmit power of an 802.11b PC card).

Use directional antennas whenever you can.

Use 802.11a in high usage areas because the 5 GHz band has more channels.

Do any of these things sound familiar?  Does this nine-year old information resonate today?

If you have designed, deployed, managed or troubleshot a HD WiFi installation, these rules should sound familiar.  Some of the details may have changed (stations that dynamically adjust transmit power; more 5 GHz channels; 40 MHz channel options in 802.11n), but the basics are the same as they always were.

During the Dark Ages of WiFi (I just watched The Name Of The Rose, so I'll choose that term instead of "Medieval WiFi"), just about everyone everywhere was trying to beat the basics.

Remember adaptive transmit power on APs?

Remember automatic channel selection?

Remember trying to use channels besides 1, 6 and 11?

Remember co-locating 2.4 GHz AP radios close to each other, or even in the same box?

Remember APs without external antenna interfaces?

Actually, all of these things still exist.  And they all are still used, and -- in some unfortunate cases -- these things are used for HD WiFi.  None of them should be* (save auto channel selection, which still works in the 5 GHz band), but when WiFi folks fail to learn WiFi basics, these things happen.

There was one other thing that Mr. Westcott taught us during that August in Pasadena so long ago.  He taught us the importance of analysis.  He taught us that if you can't see what's going through the air, you'll have a tough time getting your infrastructure optimized.  That basic of WiFi still applies, too.  Learn your sniffers, folks.  Get familiar with WildPackets OmniPeek or Fluke AirMagnet WiFi Analyzer (or if you prefer to save a little bit of money and waste a whole lot of time, Wireshark) and get yourself a good portable spectrum analyzer (I like Metageek Chanalyzer with WiSpy DBx) to go with it.

*If you're supporting low density, non-mobile WiFi, then by all means use those outdated WiFi design principles and features.  Just keep that crap away from sports facilities.  Yes, I am there to watch the Milwaukee Bucks, but I also would like to set my DVR from my seat if I forgot to record The Mindy Project.

Comments

  1. Regular lurker here. Noob questions:

    I recently fired up Wi-Fi Diagnostics for the first time after upgrading to 10.8 and had an un-redacted capture. You ever have this happen? I can't seem to duplicate it.

    How do I get out of monitor mode post-capture? I can't seem to find out, and the only way I get my Wi-Fi back is to reboot. That can't be right.

    ReplyDelete
    Replies
    1. My experience has been that I always get a redacted capture in OS X 10.8 Wi-Fi Diagnostics.

      I have always been able to get out of monitor mode by just quitting Wi-Fi Diagnostics (and I think I even leave monitor mode by just stopping the capture). If you have to reboot then I'm guessing that something else is afoot.

      Delete
  2. I read the above article and I got some knowledge from your article. It's actually great and useful data for us. Thanks for share it. Enterprise Wireless Solutions

    ReplyDelete
  3. Without the use of cables, Wi-Fi enables you to access the Internet from your smartphone, laptop, or tablet. With a connection that is quicker and more dependable than cable or DSL, WiFi Fiber is the industry standard for home internet. Unlike conventional connections, which transfer data by electricity, fibre optic internet sends data as light along tiny strands of glass encased in plastic. C3 Pure Fibre offers the most effective WiFi in Grand Cayman at cost-effective prices. Thank you for sharing valuable information.

    ReplyDelete
  4. Great article! This blog post dives into the nitty-gritty details of T-Mobile USA's mobile wireless network, giving readers a clear picture of its complexity and innovation. It's impressive to see the level of commitment T-Mobile has in providing top-notch service. Well done! wireless networking

    ReplyDelete

Post a Comment

Popular posts from this blog

Five Facts About 6 GHz Wi-Fi

Chips, Glorious Wi-Fi 6E Chips!

Go To Sleep, Go To Sleep, Go To Sleep Little iPhone